MOT Test Centre Tips: Best Car Maintenance Advices

Maintaining motorway safety and passing your MOT check depends on keeping your automobile in top condition. Checking the brakes, lights, fluid tiers and tyre strain on an everyday basis may have a considerable effect. To prevent future costly repairs, it’s a good idea to devise periodic assessments and take care of little problems early. 

A neat appearance may additionally make an excellent first impression at some stage in the MOT, therefore always preserve your vehicle smooth on the interior and exterior. Make sure your automobile’s renovation document is cutting-edge before creating a reservation. Choosing a sincere class 4 MOT test centre guarantees that your automobile is evaluated expertly, permitting you to pressure with a warranty.

Examine and Maintain Your Tyres:

The tyres on your car are important for security and are a big part of a MOT check. Verify that the depth of the tread is appropriate; the minimum required by law is 1.6 mm across the middle three-quarters of the tyre. To make sure, use a tread depth gauge or the easy 20p coin test. Additionally, make sure the tires are filled to the specified pressure by the manufacturer’s instructions and check them for any cuts, bulges, or irregular wear.

Maintain Complete Light Function:

One of the most frequent causes of MOT failures is malfunctioning lighting. Spend a few minutes checking all of the lights, which include the headlights, indicators, brake lights, rear lights, and fog lamps, before you go to the MOT test establishment. Any burned-out lights should be replaced right away. 

Examine and Replenish Fluids:

Coolant, brake fluid, windscreen washer fluid, and motor oil should all be at the proper levels. Low levels of fluid might result in a malfunction or major mechanical issues. To find out where these fluid reservoirs are and to fill them up if necessary, consistently refer to your vehicle’s handbook. Don’t forget to select the appropriate fluid type for each system.

Verify the Brakes Are in Excellent Shape:

Brakes are an important aspect of protection and a key evaluation factor for a MOT test. When you brake, test for any bizarre sounds, along with scraping or screeching, given that these might be symptoms of overused brake pads. Before your MOT, get your car tested with the aid of an expert if it pulls to 1 side or if the brakes appear spongy.

Wash Your Car From the Inside Out:

Although mechanical inspections may not be directly affected by appearance, a clean automobile demonstrates your concern for upkeep. Wash the outside, clear the inside of debris, and give the windows and mirrors an extensive scrub. In severe situations, a filthy automobile may force inspectors to overlook significant problems or even decline to do the MOT.

Check the Wipers and Windscreen:

Clear eyesight relies upon the state of your windscreen and the wipers, and a MOT failure may also result from cracks and chips greater than 10 mm which might be within the passenger’s subject of view. Additionally, an average hassle is tired wiper blades that fail to effectively smooth the windscreen. Make sure the washer jets are spraying correctly and update them if needed.

Examine the Exhaust System:

While your vehicle is operating, listen to its sounds; any odd sounds may indicate a problem with its exhaust system. A failure might be caused by an overly loud exhaust or visible smoke when the engine is at rest. An automotive technician should examine any strange noises well in advance of your MOT examination.

Keep An Eye On the Suspension Mechanism:

Braking and general vehicle control can be impacted by poor handling. The car sitting low on one side, excessive bouncing when applying pressure to the bonnet, or banging sounds over irregularities are all indicators of suspension issues. Since suspensions are a crucial MOT test component, taking care of these problems now will help you avoid later, expensive repairs.

Fasten Seat Belts and Seats Securely:

The seat belts must retract effectively, snap firmly into position, and not tear or break. Verify that all of the seats are securely fastened to their mountings and test every seat belt in the vehicle. Since this is a guaranteed MOT failure, belts that are defective or broken must be changed.

Verify That the Number Plates Are Clear and Readable:

Although it may seem insignificant, filthy or concealed license plates are illegal and can cause a MOT failure. Make that your front and rear plates adhere to regulatory requirements, are clean, and are correctly installed. Prior to the MOT test, think about getting new license plates if yours are worn or chipped.

Examine the Horn:

A little but essential component of your car’s safety gear is the horn. It has to be in good operating order and loud enough for other drivers to be heard. Before your MOT test, give it a brief burst to make sure the horn is functioning properly because a malfunction might cause a failure.

Final Words:

Maintaining your car should be a continuous endeavour rather than anything you do in the final moments before your MOT. In addition to helping you achieve your MOT, following these maintenance standards will guarantee that your vehicle operates effectively, enhances performance and reliability, and dependably all year long.